|
||||||
|
|
|
|
|
|
|
 |
|
    |
|
 |
|
 |
B-1050 37-pin Breakout. Breaks out digital I/O channels for CH Series. Requires L-4700 37-pin header and L-4801 or L-4802 cable. |
 |
B-1055 Same as above, but without enclosure. |
 |
B-1250 Four to One RF multiplexer for CH-Series. Also available without enclosure (B-1255). Requires L-4861 or L-4862 cable for connection to board, and L-4891 or L-4892 to daisy chain B-1250 units together. |
 |
B-1410, B-1420 B-1410 is the Rackmount kit and termination panel for CH Series, for use with B-1050 and B-1250. B-1420 is the BNC termination panel for the B-1410. |
 |
B-1350 PCI board providing easy screw-terminal header access to the 16 Digital I/O channels of the CH Series. Can be used instead of B-1050 breakout unit. |
 |
L-4700 DB37 bracket to header connector. Used with L-4801 or L-4802 cable to connect B-1050 digital I/O breakout unit to CH board, or used with L-4861 or L-4862 cable to connect B-1250 RF multiplexer unit to CH board. |
 |
L-4801, L-4802 Connects from DB37 connector of L-4700 to B-1050 breakout unit. Available in 1m and 2m lengths. |
 |
L-4861, L-4862 DB37 to DB9. Connects from DB37 connector on L-4700 bracket to DB9 connector on B-1250 RF multiplexer. Available in 1m and 2m lengths. |
 |
L-4891, L-4892 DB9 to DB9. Connects from DB9 connector on B-1050 breakout unit one to B-1250 multiplexer, or to daisy chain between multiple B-1250 multiplexers. Available in 1m and 2m lengths. |
 |
L-420x, L-421x BNC to BNC cables, available in 50 Ohm (L-420x) and 75 Ohm (L-421x) configurations, and in 1m and 2m lengths. |
 |
L-422x BNC to clip cables, available in 1m and 2m lengths. |
| |
|
|
|
||